MIX KNOB
– Determines balance of wet/dry signal.
Fully clockwise = 100% wet.
Fully counter-clockwise= 100% dry.
15
TRAILS BUTTON
– When set to ON the delay will continue to decay naturally when bypassed.
(No new repeats will be generated). In this mode Andromeda uses a buffered bypass.
When set to OFF the delay will cut off as soon as the effect is bypassed. In this mode Andromeda is
true-bypass.
16
BYPASS SWITCH
– Turns delay on and off. Hold for Freeze. Be aware that in analog mode feedback
can run away and create loud or unpleasant noise.
17
TAP/PRESET FOOTSWITCH
– Defaults to TAP mode, tap the footswitch two or more times to set
the tempo of the delay. To change to PRESET mode press and hold the footswitch until the LED stops
blinking and becomes solid, then press the footswitch to scroll through the four presets in the current
bank. After 2 seconds the mode will revert to TAP.
14
Your new Andromeda Dynamic Delay is fully functional out of the box (requires external 9V to
18V regulated DC adapter (center pin negative) with 300mA current rating, not included), but
you can access more utility and options by downloading the Librarian software at
www.seymourduncan.com/software
. These functions include:
Firmware Updates
– We will periodically release firmware updates for Andromeda to
add more features or increase the usability. You can download and install these updates by
connecting Andromeda to your computer using a micro USB cable and running the Librarian
software.
