6
DX-143.392K
The controls of your Wine cooler (the upper zone and middle zone)
RUN
Indicator light illuminates to signify the cooling mode is currently in operation.
Light
To control the inner light turn on/off.
Power
To control this appliance turn on/off.
“Set Upper” Button
To set the temperature of the upper chamber.
“Set Middle” Button
To set the temperature of the middle chamber.
“Up chamber”
To shows the temperature of the up chamber.
“Middle chamber”
To shows the temperature of the middle chamber.
Setting the Temperature Control
Each cooling compartment of the wine cooler (upper & lower) is independently controlled. To
set the temperature:
•
Connect the power cord to a properly grounded outlet. In the event of a power interruption,
all previous temperature settings are automatically erased and each compartment will
default to a preset temperature setting of: 7°C for upper compartment and 12°C for
middle compartment.
•
Set the desired cooling temperature by pressing the buttons adjacent to the “Set Upper/Set
Middle” program. Each depression of the buttons will scroll through the available
temperature settings (for each compartment) in increments of 1 degree. The temperature
selected will flash in the LED display for approximately 5 seconds, then revert back to
display the temperature of the internal cabinet
Upper compartment:
The temperature setting can be adjusted from 5°C to 18°C.
Middle compartment:
The temperature setting can be adjusted from 5°C to 12°C.
•
To view the “Set” temperature (anytime) press and hold the corresponding button, the
“Set” temperature will temporarily “flash” in the LED display for 5 seconds.
The controls of your Wine cooler (the Lower zone)
Power
Light
RUN
Middle Chamber
Upper Chamber
℃
℃
Set Middle
Set Upper
