INSTRUCTION MANUAL
11
DOWN
You could decrease the set temperature 1 ºC or 1 ºF by pressing this mark once.
FAHRENHEIT OR CELSIUS DISPLAY
You could get Fahrenheit or Celsius temperature indicate if you touch the marks.
POWER
Controls the ON/OFF of the whole system. By pressing the POWER button, the system
will enter automatic detection mode. In the process of detection, the numbers on the
digital tube will be lighted and through this can judge whether the system is working
normally. The system will go into the normal working mode after 10s’ automatic detection
RUN
LED light will illustrate when the compressor is operating, you can know the working state
through the light.
NOTE:
•
The temperature set for the lower zone must always be not lower than
the one for upper zone.
•
If the unit is unplugged, has lost power, or turned off; you must wait 3 to
5 minutes before restarting the unit. If you attempt to restart before this
time delay, the Wine Cooler will not start.
6.3. Shelf types, adjustment
•
Your wine cooler supplied with sapele shelves. DX-200.450K sapele
shelves fixed by screws for safety reason, other models’ sapele shelves
placed on rubber ended holders.
•
Different type of optional shelves available:
o
fix beech shelves to store wines in upright position (fixed by screws
to hinges for safety reason)
o
rolling beech shelves
o
display beech shelves.
•
You can place bottles in lay down or upright position. Many bottles may
differ in size and dimensions. As such the actual number of bottles you
may be able to store may vary. Bottle capacities are approximate
maximums when storing traditional Bordeaux 750 ml bottles and include
bulk storage.