Page 31
PRO DQ
g2
Installation and User’s Manual
6.1.
Replacing a Disk Module
A defective Disk Module can be easily replaced. Hot swapping is allowed without
interruption to your workflow if the RAID is operating in one of the drive
redundant RAID mode (1,3,5,6).
In a redundant RAID mode, rebuild will start automatically after replacement of a
defective module.
•
Pull lock pin right to unlock during insert and removal.
Page 32
PRO DQ
g2
Installation and User’s Manual
7. Formatting and Partitioning
7.1.
Apple OS X Formatting
The PRO DQ are shipped pre
appear on the desktop after driver installation and reboo
Should it be necessary to re
Apple Disk Utility.
To start Disk Utility, move pointer to upper left corner of screen, click on Go then
click on Utilities. Locate and launch Disk Utility.
7.1.1. Erase an existing parti
Select the RAID on left, click on Partition tab, select Free Space. Click on
Partition on lower right.
Installation and User’s Manual
Formatting and Partitioning
Formatting
are shipped pre-configured for Mac OS X, the RAID will
appear on the desktop after driver installation and reboot.
Should it be necessary to re-format and partition the RAID, use the
To start Disk Utility, move pointer to upper left corner of screen, click on Go then
ocate and launch Disk Utility.
existing partition
Select the RAID on left, click on Partition tab, select Free Space. Click on
configured for Mac OS X, the RAID will
To start Disk Utility, move pointer to upper left corner of screen, click on Go then
