21
Installation and Operation of Product Holding Cabinets
PUSH BUTTONS
TO CHANGE
DAYPART MENU -
CORRESPONDING LED
WILL TURN ON
(BREAKFAST SHOWN)
DAYPART PROGRAMMING (OPTION)
6. Holding down the button continuously will speed
the time up.
7. When the proper time is reached on the Display
release the Arrow Button and after 5 seconds unit
will accept new time and return to normal operation.
Menu Mode
This option is used to change Meal Set and view,
Linking, Hold Time and Hold Temp.
Enter Menu Mode
1. Press and hold the Enter Button for three seconds.
Status LED FLASHES GREEN and “MENU” is
displayed on left Display and “UP” is displayed
on right, indicating upper well information will be
displayed.
2. To view lower well information press the Down Arrow
Button – “DOWN” will appear in the right Display.
FLASHING Status LED will be present on side of
keypad corresponding to well being viewed.
3. Press the Enter Button to accept.
Change Meal Set
Note:
The Meal Set can be changed globally from
any keyboard.
1. Status LED stops flashing and “MEAL” “SET1”
appears on the Display.
2. Press the Enter Button again. Status LED
FLASHES indicating edit mode.
3. Use the Arrow Buttons to scroll to desired Meal Set
and press the Enter Button to accept. Status LED
stops flashing and desired Meal Set is displayed.
Display Link, Hold Time & Temperature
Press Arrow Button repeatedly to scroll through Link,
Time and Temperature settings.
Exit Menu Mode
Scroll to EXIT and press the Enter Button to exit
menu mode.