Duke Fitness DU-XB40, Assembly And Operating Instructions Manual

Page: 13 / 32

13
Step 2: Mounting the front and rear stabilizer
1. Remove the four domed nuts (8) and the four curve
washers (7) from the front and rear stabilizer (5 & 6).
2. Mount the rear stabilizer (6) with the transportation
wheels outwards to the rear stabilizer (2) with the
previously removed two curve washers (7) and two
domed nuts (8).
3. Mount the front stabilizer (5) to the main frame
(1) with the previously removed two curve
washers (7) and two domed nuts (8).
4. Tighten the nuts with the tool.
Step 3: Mounting the seat
1. Remove the three nylon nuts (17) and
the three flat washers (18) from the
seat (19).
2. Mount the seat (19) to the seat post
(3) with the previously removed three
flat washers (18) and three nylon nuts
(17). Tighten the nuts with the tool.
3. Shove the seat post (3) into the main
frame (1) and turn the adjustment knob
(11) into the hole on the side of the main
frame (1). Make sure that the safety pin on the
adjustment knob (11) can reach one of the holes
on the seat post (3) before tightening completely.
⚠
CAUTION
Make sure that the seat post (3) is firmly
secured by the adjustment knob (11) before
using the device.