Duke Fitness DU-STEPPER PLUS, Assembly And Operating Instructions Manual

Page: 12 / 36

12
STEPPER PLUS
2.3 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
First loosely screw all parts together and check that they fit properly. Tighten the screws using
the tool only when you are instructed to do so.
Step 1: Assembly of the Stabilizers and the Covers
1. Mount the front stabilizer (2) and the rear stabilizer (3) to the main frame (1) with four screws (4),
four spring washers (5) and four washers (6) on each of the stabilizers (2 & 3).
2. Mount the left and right decorative covers (70L & 70R) to the main frame (1) with two screws (73)
and one screw (72) on each side.