Dukane Starfire HD 4010, Operation Manual

Page: 14 / 20

CAUTION
Do not overload 120V AC outlets with accessories that
exceed a total of 5 amps.
8
CAUTION: If the OHP is brought directly from a cold to a warm
location or it is placed in a very humid room, moisture may condense
on electrical and optical parts in the unit. If this occurs, wait for
OHP to reach room temperature before turning it “ON.”
High/Low Lamp Switch
When using with an LCD panel, use the projector at its brightest
lumen output (Models 6000, 5510, 4030, 4010).
Reduce light output (High/Low switch) to extend lamp life. Ideal
when using regular transparencies.
Lamp Changer
The lamp changer allows you to quickly replace a failed lamp. Turn
the power switch “OFF.” Simply push slightly, then slide the lamp
changing lever towards the side labeled “RESERVE.”
LEVER