Lens Replacement Procedure
1. Return the lens shift to the center position
(1) Press the
LENS SHIFT
button. The LENS SHIFT
dialog will appear.
(2) Press the
ENTER
or
INPUT
button while the dialog is
displayed to execute the CENTERING feature, which
adjusts the lens to the center. A message dialog is
displayed for confirmation.
(3) Pressing the ►button performs CENTERING.
Note
•
You can also perform CENTERING in the standby mode
by pressing the
FUNCTION
and
LENS SHIFT
buttons on
the control panel for 3 seconds at the same time.
2. Turn off the LCD projector
Turn off and unplug the LCD projector, and allow the projector to
sufficiently cool down.
3. Remove the front cover
Move and slide the front cover up while pressing the front cover
from the underside and remove the front cover from the LCD
projector.
4. Remove the lens
Support the lens, and lower the lens lock lever to the lowest
position and remove the lens from the LCD projector. You can
move the lever while the upper plate touches lower one.
Caution
■ Take care to avoid hitting the surface of the lens on the
LCD projector when removing the lens as this may lead to
malfunction.
■ Do not touch the socket of the lens or subject it to
impact as this may lead to malfunction.
5. Attach the lens
(1) Remove the lens cap. Then turn the product label of the lens
upward and install the lens in the LCD projector.
Caution
■ Installing the lens in the LCD projector with the lens cap
on may lead to malfunction.
■ Take care to avoid hitting the surface of the lens on the
LCD projector when attaching the lens as this may lead to
malfunction.
■ Do not touch the connector of the lens or subject it to
impact as this may lead to malfunction.
(2) Support the lens, and move the lens lock lever to the upside
(until the lens lock lever clicks into the locked position).
Warning
■ To prevent the lens from falling off, after attaching the
lens, check that it is securely mounted and that the lens
does not move. If the projector falls or topples over, it
could result in injury or damage to the projector and the
surrounding things.
6. Attaching the front cover
Insert the front cover into the LCD projector body.
Lens attachment is completed.
Front cover
(upper part)
Lens cap (rear)
Product label
Lens lock lever
Front cover
(upper part)
Lens lock lever
