background image

Optional Lens User’s Manual

Important  Safety Instructions

 

 (Always follow these instructions)

Please read this section on important safety instructions before 
replacing the projector lens. To prevent accidents during lens 
replacement and ensure product safety after replacing the lens, 
be sure to follow the safety instructions described herein.

● These symbols indicate actions that can result in injury or
damage if these operations are not followed correctly.

 Warning

This symbol indicates that there is a 
possibility of serious injury or even death 
if the operation is not followed correctly

 Caution

This symbol indicates that there is a 
possibility of physical injury or damage to 
equipment if the operation is not followed 
correctly.

● These symbols indicate the types of precautions that must
followed.

This symbol indicates 
that caution must be 
taken.

This symbol warns of 
possible high heat.

This symbol warns 
of possible electrical 
shock.

This symbol indicates 
an action that must 
not be performed.

 Warning

■ For safety, do work in accordance with the
Exchange Manual to replace the lens.

■ Please read this manual and manuals for the
LCD projector to be used thoroughly to ensure 
correct usage through understanding. 

Incorrect usage could result in fire, an injury or damage.

■ Do not subject the device any shock or impact.

Any shock or impact could result in an injury or 
damage. The lens projects out of the device. Take 
care not to strike it.

Notice

■ Take care of the lens.

• When transporting the lens, protect the lens by attaching the lens cap.
• Do not touch the lens to prevent fog or dirt on the lens that
could cause deterioration of display quality.
• Do not touch the lens directly. This can dirty the lens and cause
deterioration in image quality.
• The lens is a precision optical device. Carefully handle the lens
without subjecting it to shocks or vibrations.
• When resting the lens on a surface, place the lens face down
on a soft cloth.

■ Cleaning

• Use commercially available lens tissue to clean the lens (used
to clean cameras, eyeglasses, etc.).
• Excepting for lens, use a soft cloth to clean. When excessively soiled
dilute a neutral detergent in water, wet and wring out the soft cloth.
• Do not use detergents or chemicals other than those noted
above (e.g. benzene or thinners).

Informa tion for users  

applicable in European Union countries

This symbol on the product or on its packaging means 
that your electrical and electronic equipment should be 
disposed at the end of life separately from your household 
wastes. There are separate collection systems for recycling 
in EU. For more information, please contact the local 
authority or the dealer where you purchased the product.

Operations

• Project an image as described in the LCD Projector user's
manual, and adjust the size and focus of the projected image.
• See the Projection Distance table in this user's manual for
information on optional lens projection distances.

Note

• The distance of projection may not allow focusing on the
peripheral area of the screen. Adjust the focus to keep the center 
and the peripheral area of the screen balanced.
• These specifications are subject to change without notice.
• The zoom lens may cause some distortion of the image on the
screen depending on the zoom position.
• Distortion may appear on screen if the keystone correction
(trapezoidal distortion correction) is overly adjusted.
• Keystone correction (trapezoidal distortion correction) may be
limited with some lenses.

Important Operation Instructions

 Warning

■ Do not place the lens in a location subject to
direct sunlight or other strong lighting or near 
heat-radiating equipment.

This can cause a fire due to the properties of the 
lens. It can also cause injury or damage to the lens.

■ Be sure to unplug the LCD projector before
replacing the lens.

The inside of the LCD projector has areas of high 
voltage which can cause electrical shock.

■ Before replacing the lens, be sure to turn off
and unplug the LCD projector, and allow at least 
45 minutes for the projector to fully cool down.

■ When attaching, take care so that dust does
not enter inside or stick to the connector.

Continued use with dust inside may result in fire or 
electric shock.

■ If the projector is mounted on a ceiling, ask the
dealer to replace the lens.

This can cause injury.

 Caution

■ When replacing the lens, do not touch the LCD
panels or polarizing plates of the LCD projector 
or subject them to shocks.

This can cause damage to the equipment. It can 
also cause a misalignment of the optical adjustment 
and, therefore, require readjustments.

■ When replacing the lens, be careful not to
damage the connectors or wires inside the LCD 
projector.

This can cause damage to the equipment. Be 
careful not to pull on the connectors or wires or get 
them caught in the circuit board or case.

English

QR82295

Summary of Contents for LL-704









Reviews: