Dukane IQ Explorer 3, Quick Start Manual

Page: 12 / 23

SE
CTION 3 - OPERA
TION
IQ Explorer 3 QUICK START GUIDE
9
Getting Started Using IQ Explorer 3
STEP 1 -
Getting Started
Ensure that a proper connection of the
IQ Explorer 3
software and the servo press has been made. See Figure 3-1 below.
STEP 2 -
Select Unused Setup
Click on the Hardware tab. Click on the Setup File Name drop down box and select an unused setup as shown in
Figure 3-2.
Name of the connected welder.
Names of active welders in
the network appear when
Show Welders tab is clicked.
Figure 3-1 Connected Welder
Figure 3-2 Setup File Selection
Setup file
Hardware tab