SE
CTION 2 - H
EAL
TH
AND
S
AFET
y
Infinity™
Series Servo Ultrasonic Press Systems QUICK START GUIDE
9
FCC
The Infinity™ generator complies with the following Federal Communications Commission
regulations.
•
The limits for FCC measurement procedure MP-5, “Methods of Measurement of radio Noise
Emissions from ISM Equipment”, pursuant to FCC Title 47 Part 18 for Ultrasonic Equipment.
CE Marking
This mark on your equipment certifies that it meets the requirements of the EU (European Union)
concerning interference causing equipment regulations. CE stands for Conformité Europeéne
(European Conformity). The equipment complies with the following CE requirements.
•
The EMC Directive 2014/30/EU for Heavy Industrial —
EN 61000-6-4:
EN
55011
EN 61000-6-2:
EN61000–4–2
EN61000–4–3
EN61000–4–4
EN61000–4–5
EN61000–4–6
EN61000–4–8
EN61000–4–11
•
The Low Voltage Directive 2014/35/EU.
•
The Machinery Directive 2006/42/EC. EN 60204: Safety of Machinery - Electrical
Equipment of Machines Part 1: General requirements.
•
EN ISO 12100: Safety of Machinery - General principles of design, risk assessment, and risk
reduction.
IP Rating
The Infinity™ generator has an IP (International Protection) rating from the IEC (International
Electrotechnical Commission).
The rating is IP2X, in compliance with finger-safe industry standards.
The Infinity™ generator complies with these standards as verified by TÜV rheinland.
UL
Tested to Underwriters Laboratories:
UL 61010–1, IEC 61010-1
CAN/CSA
National Standards of Canada: CAN/CSA C22.2 No. 61010–1–12
Regulatory Agency Compliance
CAUTION
Do NOT make any
modifications to
the generator or
associated cables
as the changes may
result in violating one
or more regulations
under which this
equipment is
manufactured.
