•Ifthelampshouldbreak(itwillmakealoudbangwhenitdoes),unplug
the power cord from the outlet, and make sure to request a replacement
lamp from your local dealer. Note that shards of glass could damage the
projector’sinternals,orcauseinjuryduringhandling,sopleasedonottryto
cleantheprojectororreplacethelampyourself.
•Ifthelampshouldbreak(itwillmakealoudbangwhenitdoes),ventilate
theroomwell,andmakesurenottobreathethegasthatcomesoutofthe
projectorvents,orgetitinyoureyesormouth.
• Before replacing the lamp, make sure the power switch is off and the
powercableisnotpluggedin,thenwaitatleastminutesforthelampto
cool sufficiently. Handling the lamp while hot can cause burns, as well as
damagingthelamp.
Lamp
The projector uses a high-pressure mercury glass lamp. The lamp can
break with a
loud bang, or burn out,
if jolted or scratched, handled while hot, or worn over time.
Notethateachlamphasadifferentlifetime,andsomemayburstorburnoutsoonafter
you start using them. In addition, when the bulb bursts, it is possible for
shards of
glass
toflyintothelamphousing,andfor
gas containing mercury
toescapefromthe
projector’sventholes.
About disposal of a lamp
•Thisproductcontainsamercurylamp;donotputintrash.
Disposeofinaccordwithenvironmentallaws.
Forlamprecycling,gotowww.lamprecycle.org.(inUSA)
Forproductdisposal,contactyourlocalgovernmentagencyorwww.eiae.org(intheUS)
orwww.epsc.ca(inCanada).
Formoreinformation,callyourdealer.
•Donotopenthelampcoverwhiletheprojectorissuspendedfromabove.
This is dangerous, since if the lamp’s bulb has broken, the shards will
fall out when the cover is opened. In addition, working in high places is
dangerous,soaskyourlocaldealertohavethelampreplacedevenifthe
bulbisnotbroken.
• Do not use the projector with the lamp cover removed.At the lamp
replacing, make sure that the screws are screwed in firmly. Loose screws
couldresultindamageorinjury.
•Usethelampofthespecifiedtypeonly.
• If the lamp breaks soon after the first time it is used, it is possible that
thereareelectricalproblemselsewherebesidesthelamp.Ifthishappens,
contactyourlocaldealeroraservicerepresentative.
•Handlewithcare:joltingorscratchingcouldcausethelampbulbtoburst
duringuse.
•Usingthelampforlongperiodsoftime,couldcauseitdark,nottolightup
ortoburst.Whenthepicturesappeardark,orwhenthecolortoneispoor,
pleasereplacethelampassoonaspossible.Donotuseold(used)lamps;
thisisacauseofbreakage.
WARNING
HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE
Disconnect
theplugfrom
thepower
outlet
