105
QM00193 - 2
9. Troubleshooting
Phenomenon: Cannot communicate with the projector. (Wireless network)
1. Common
Item to be checked
Solutions
Is the projector turned on?
Turn on the projector.
Is the network device such as an
access point, etc. turned on?
Turn on the network device.
Is STANDBY MODE set to
NETWORK(WOL) or SAVING?
The network function is not available when
STANDBY MODE is set to NETWORK(WOL)
or SAVING. If you want to use the network
function in the standby mode, set to QUICK
START or NORMAL.
Are the network settings such as
IP address set correctly?
Check the network settings in the NETWORK
INFORMATION - WIRELESS INFORMATION
menu. Consult with your network administrator
for details.
Is the USB wireless adapter
(optional parts : USB-WL-5G)
inserted into
WIRELESS
port of
the projector?
Insert the USB wireless adapter.
Is an optional USB wireless
adapter used?
The USB wireless adapter available to this projector
is optional USB-WL-5G only.
Is LED of the USB wireless
adapter blinking?
When LED of the USB wireless adapter does not
blink in over 1 minute after inserting, pull out and
insert the USB wireless adapter again.
If the problem persists, the USB wireless adapter
may be broken. Contact your dealer.