43
3.1 Projector Web Control - Network Settings (continued)
3. Web Control
Item
Description
Wireless Setup
Configures the wireless LAN settings.
Simple Access Point
settings
Configures Simple Access Point mode.
IP Configuration
Configures network settings.
IP Address
Configures the IP address.
Subnet Mask
Subnet mask of the projector is fixed to 255.255.255.0.
SSID
Input SSID.
The maximum number of input characters is 32.
Only alphabets, numbers and the following symbols can be
used.
!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~ and space.
Default setting of SSID in Simple Access Point mode is
[SimpleAccessPoint].
Change default setting before use not to overlap.
SSID Broadcast
Select SSID Broadcast.
Set this function to OFF when making SSID of a projector not
to be displayed in wireless connection list of the computer.
Encryption
Select data encryption method.
WPA Passphrase
Input WPA Passphrase.
Available number of input characters is 8 to 63. Only
alphabets, numbers and the following symbols can be used.
!"#$%&'()*+,-./:;<=>?@ [\]^_`{|}~ and space
Channel
Select from “1” to “11”, a channel to use in the Simple Access
Point mode.
(continued on next page)
• The channels may vary depending on the
country. In addition, depending on the country or region,
it may be required to use a wireless network card that
conforms to the standards in the respective country or
region.
NOTE
