35
IMAGE menu
Item
Description
V POSITION
Using the ◄/► buttons adjusts the vertical position.
Down
ó
Up
• Over-adjusting the vertical position may cause noise to appear on
the screen. If this occurs, please reset the vertical position to the
default setting. Pressing the
RESET
button when the V POSITION
is selected will reset the V POSITION to the default setting.
• When this function is performed on a video signal or an s-video
signal, the range of this adjustment depends on OVER SCAN (
34
)
setting. It is not possible to adjust when OVER SCAN is set to 10.
•
This function is unavailable for signal from the
HDMI
port.
H POSITION
Using the ◄/► buttons adjusts the horizontal position.
Right
ó
Left
• Over-adjusting the horizontal position may cause noise to appear on
the screen. If this occurs, please reset the horizontal position to the
default setting. Pressing the
RESET
button when the H POSITION is
selected will reset the H POSITION to the default setting.
• When this function is performed on a video signal or an s-video
signal, the range of this adjustment depends on OVER SCAN
(
34
)
setting. It is not possible to adjust when OVER SCAN is set to 10.
• This function is unavailable for signal from the
HDMI
port.
H PHASE
Using the ◄/► buttons adjusts the horizontal phase to eliminate flicker.
Right
ó
Left
• This item can be selected only for a computer signal or a
component video signal. This function is unavailable for signal from
the
HDMI
port.
H SIZE
Using the ◄/► buttons adjusts the horizontal size.
Small
ó
Large
• This item can be selected only for a computer signal. This function
is unavailable for signal from the
HDMI
port.
• When this adjustment is excessive, the picture may not be
displayed correctly. In such a case, please reset the adjustment
by pressing the
RESET
button on the remote control during this
operation.
• Images might appear degraded when this function is operated, but
it is not a malfunction.
(continued on next page)
