manualshive.com logo in svg

Dukane 8786, User Manual, Page: 59 / 66

Share
Download
Dukane 8786 User Manual Download Page 59

59

Please check and clean the air filter periodically. When the indicators or a 

message prompts you to clean the air filter, comply with it as soon as possible. 

Replace the air filter when it is damaged or too soiled. To prepare a new air filter, 

contact your dealer and tell the air filter type number.

Type number : MU03602

When you replace the lamp, please replace the air filter. An air filter of specified 

type will come together with a replacement lamp for this projector.

Cleaning the air filter

1.

 

Turn the projector off, and unplug the power 

cord. Allow the projector to sufficiently cool down.

2.

 

Use a vacuum cleaner on and around the 

filter cover.

3.

 

While supporting the projector with one hand, 

use your other hand to pull the filter cover 

forward in the direction of the arrow.

4.

 

Use a vacuum cleaner for the filter ventilation of 

the projector. And clean the air filter that is set 

at one side of the filter cover by using a vacuum 

cleaner over the other side of the filter cover.

Please replace the air filter when it is damaged or 

too soiled. When the air filter is set, take its half 

moon shape cut part to the swelled part of the 

filter cover. 

5.

 

Put the filter unit back into the projector.

6.

 

Turn the projector on and reset the filter time 

using the FILTER TIME item in the EASY MENU. 

(1) Press the MENU button to display a menu. 

(2) Point at the “FILTER TIME” using the ▼/▲ button, then press the ► button. A 

dialog will appear.

(3) Press the ▲ button to select “RESET” on the dialog. It performs resetting the 

filter time.

Maintenance

Air filter

NOTE

  • Please reset the filter time only when you have cleaned or replaced 

the air filter, for a suitable indication about the air filter.

• The projector may display the message such as “CHECK THE AIR FLOW” or 

turn off the projector, to prevent the internal heat level rising. 

The filter cover

The air filter is set in the reverse 

side

Swelled part

Air filter

Filter cover

WARNING

  

►Before taking care of the air filter, make sure the power cable 

is not plugged in, then allow the projector to cool sufficiently. 

►Use only the air filter of the specified type. Do not use the projector without the 

air filter or the filter cover. It could result in a fire or malfunction to the projector.

►Clean the air filter periodically. If the air filter becomes clogged by dust or the like, 

internal temperatures rise and could cause a fire, a burn or malfunction to the projector.

Summary of Contents for 8786



































































Reviews:

No comments