119
Troubleshooting
Phenomena that may be easy to be mistaken for machine defects (continued)
Phenomenon
Cases not involving a machine defect
Reference
page
Sound does
not come out.
The signal cables are not correctly connected.
Correctly connect the audio cables.
12 ~ 15
The MUTE function is working.
Restore the sound pressing
MUTE
or
/
-
button on the remote control.
23
The volume is adjusted to an extremely low level.
Adjust the volume to a higher level using the menu
function or the remote control.
23, 49
The AUDIO SOURCE/SPEAKER setting is not correct.
Correctly set the AUDIO SOURCE/SPEAKER in AUDIO menu.
49
The Sound button (♪) or checkbox is disabled.
If you have selected
USB TYPE A
, turn the sound on
from the Thumbnail menu.
If you have selected
USB TYPE B
, remove the check
mark from the Sound checkbox in the Options window of
“LiveViewer Lite for USB”.
If you have selected
LAN
, remove the check mark from
the Sound checkbox in the Option menu of “LiveViewer”.
87, 103,
107
No pictures are
displayed.
The lens cover is attached.
Remove the lens cover.
4
The signal cables are not correctly connected.
Correctly connect the connection cables.
12 ~ 15
The brightness is adjusted to an extremely low level.
Adjust BRIGHTNESS to a higher level using the menu function.
36
The computer cannot detect the projector as a Plug-
and-Play monitor.
Make sure that the computer can detect a Plug-and-Play
monitor using another Plug-and-Play monitor.
11
The BLANK screen is displayed.
Press
BLANK
button on the remote control.
31
"Waiting for connection." remains displayed even
though the USB TYPE B port is selected.
Remove the USB cable and reconnect after a while.
12, 13
(continued on next page)