20
Power on/off
1.
Make sure that the power cord is firmly
and correctly connected to the projector
and the outlet.
Turning on the power
2.
Make sure that the
POWER
indicator is
steady orange (
104
).Then, remove the
lens cover.
3.
Press
STANDBY/ON
button on the
projector or the remote control. The
projection lamp lights up, and the
POWER
indicator begins to blink green. When the
power is completely on, the indicator will
stop blinking and light in steady green
(
104
).
Power on/off
STANDBY/ON
button
POWER
indicator
POWER
LAMP
TEMP
STANDBY/ON
INPUT
MENU
CALIBRATION
ASPECT
ACCENTUALIZER HDCR
AV MUTE
POSITION
ESC
MENU
RESET
IWB
AUTO
PAGE
DOWN
ON
OFF
FREEZE
UP
1
2
ENTER
D-ZOOM
-
+
＋
ー
VOLUME
MAGNIFY
MYBUTTON
INPUT
KEYSTONE
TEMPLATE
(continued on next page)
To display the picture, select an input signal according to the section
Selecting an
input signal
(
23
).
The INITIAL SETTING Menu will be displayed by factory default upon startup.
Once the INITIAL SETTING Menu is set, it will not appear until FACTORY RESET
(
71
) is executed. If you wish to change the settings, refer to the LANGUAGE
(
52
) and ALTITUDE (
64
) menu.
(1) LANGUAGE: Use the ▲/▼/◄/►
buttons to select the desired language
and press the
ENTER
button of the
remote control or the
INPUT
button of
the projector to execute.
(2) ALTITUDE: Use the ▲/▼ buttons to
select NORMAL for altitude below 1600
m (5250 feet), otherwise select HIGH
and press the
ENTER
button of the
remote control or the
INPUT
button of
the projector to execute.
