18
Replacing the internal clock battery
Installing the battery is required in some cases. (
Event Scheduling in the User's
Manual - Network Guide) A battery is not contained at the time of factory shipment.
Please replace a battery according to the following procedure.
1.
Turn the projector off, and unplug the power cord.
$OORZWKHSURMHFWRUWRFRROVXI¿FLHQWO\
2.
After making sure that the projector has cooled
adequately, slowly turn over the projector, so that
the bottom is facing.
Ź$OZD\VKDQGOHWKHEDWWHULHVZLWKFDUHDQGXVHWKHPRQO\DV
GLUHFWHG%DWWHU\PD\H[SORGHLIPLVWUHDWHG'RQRWUHFKDUJHGLVDVVHPEOHRU
GLVSRVHRILQ¿UH
And also improper use may result in cracking or leakage, which could result in
¿UHLQMXU\DQGRUSROOXWLRQRIWKHVXUURXQGLQJHQYLURQPHQW
%HVXUHWRXVHRQO\WKHEDWWHULHVVSHFL¿HG
0DNHVXUHWKHSOXVDQGPLQXVWHUPLQDOVDUHFRUUHFWO\DOLJQHGZKHQORDGLQJD
battery.
.HHSDEDWWHU\DZD\IURPFKLOGUHQDQGSHWV,IVZDOORZHGFRQVXOWDSK\VLFLDQ
immediately for emergency treatment.
'RQRWVKRUWFLUFXLWRUVROGHUDEDWWHU\
'RQRWDOORZDEDWWHU\LQD¿UHRUZDWHU.HHSEDWWHULHVLQDGDUNFRRODQGGU\
place.
,I\RXREVHUYHEDWWHU\OHDNDJHZLSHRXWWKHOHDNDJHDQGWKHQUHSODFHDEDWWHU\
If the
leakage adheres to your body or clothes, rinse well with water immediately.
2EH\WKHORFDOODZVRQGLVSRVLQJDEDWWHU\
WARNING
%DWWHU\&RYHU
3.
Turn the battery cover fully in the direction indicated
“OPEN” using a coin or the like, and pick the cover
up to remove it.
4.
3U\XSWKHEDWWHU\XVLQJDÀDWKHDGVFUHZGULYHURU
the like to take it out. Do not use any metal tools.
:KLOHSU\LQJLWXSSXWD¿QJHUOLJKWO\RQWKHEDWWHU\
since it may pop out of the holder.
5.
Replace the battery with a new
MAXELL
,
Part No.
CR2032
or
CR2032H
.
Slide the battery in under the plastic claw, and push
it into the holder until it clicks.
6.
Replace the battery cover in place, then turn it in
the direction indicated “CLOSE” using such as
FRLQVWR¿[
OPEN
CLOSE
OPEN
CLOSE
90°
OPEN
CLOSE
OPEN
CLOSE
90°
