Dukane 8113 User'S Manual And Operating Instructions And Operating Instructions Download

Page: 80 / 119

SECURITY menu

Item

Description

MyScreen

PASSWORD

The MyScreen PASSWORD function can be used to prohibit access to the

MyScreen function and prevent the currently registered MyScreen image

from being overwritten.

1 Turning on the MyScreen PASSWORD

1-1 Use the ▲/▼ buttons on the SECURITY menu to

select MyScreen PASSWORD and press the ►

button to display the MyScreen PASSWORD on/

off menu.

1-2 Use the ▲/▼ buttons on the MyScreen

PASSWORD on/off menu to select ON.

The ENTER NEW PASSWORD box (small)

will be displayed.

1-3 Use the ▲/▼/◄/► buttons to enter the

password. Move the cursor to the right side

of the ENTER NEW PASSWORD box (small)

and press the ► button to display the NEW

PASSWORD AGAIN box, enter the same

PASSWORD again.

1-4 Move the cursor to the right side of the

NEW PASSWORD AGAIN box and press

the ► button to display the NOTE NEW

PASSWORD box for about 30 seconds,

please make note of the password during

this time.

Pressing the

ENTER

button on the remote control or ► button on the

projector will return to MyScreen PASSWORD on/off menu.

When a password is set for MyScreen:

•

The MyScreen registration function (and menu) will be unavailable.

•

The MyScreen Lock menu will be unavailable.

•

The START UP setting will be locked on MyScreen (and the menu will be

unavailable).

Turning the MyScreen PASSWORD off will allow normal operation of these

functions.

•

Please do not forget your MyScreen PASSWORD.

2 Turning off the MyScreen PASSWORD

2-1 Follow the procedure in 1-1 to display the MyScreen PASSWORD on/off

menu.

2-2 Select OFF to display the ENTER

PASSWORD box (large). Enter the registered

password and the screen will return to the

MyScreen PASSWORD on/off menu.

If an incorrect PASSWORD is input, the menu will

close. If necessary, repeat the process from 2-1.

3 If you have forgotten your password

3-1 Follow the procedure in 1-1 to display the MyScreen PASSWORD on/off

menu.

3-2 Select OFF to display the ENTER PASSWORD box (large). The 10 digit

Inquiring Code will be displayed inside the box.

3-3 Contact your dealer with the 10 digit Inquiring Code. Your password will

be sent after your user registration information is confirmed.

ENTER NEW PASSWORD

box (small)

(continued on next page)

ENTER PASSWORD box

(large)

Summary of Contents for 8113
























































































































Search results

Summary of Contents for 8113

Reviews:

Related manuals for 8113

Brands by name

Popular brands

Dukane 8113, User'S Manual And Operating Instructions And Operating Instructions

Search results

Summary of Contents for 8113

Reviews:

Related manuals for 8113

Brands by name

Popular brands

Dukane 8113, User'S Manual And Operating Instructions And Operating Instructions