4. Using On-Screen Menu
81
NOTE:
• This function will not be available under the following conditions:
- when a component signal is applied to the COMPUTER IN terminal
- when a Sync on Green RGB signal or composite sync signal is applied
• To enable the [AUTO POWER ON] after changing to the sleep mode turning off the projector, wait 30 seconds and input a computer
or HDMI signal.
If a computer or HDMI signal is still present when the projector is turned off, the [AUTO POWER ON] will not work and the projector
remains in standby mode.
• Depending on the projector in use, the [AUTO POWER ON] may not work properly.
In this case, set [STANDBY MODE] to [NETWORK STANDBY].
Enabling Power Management [AUTO POWER OFF]
When this option is selected you can enable the projector to automatically turn off (at the selected
time: 0:05, 0:10, 0:15, 0:20, 0:30, 1:00) if there is no signal received by any input or if no operation
is performed.
Selecting Default Source [DEFAULT INPUT SELECT]
You can set the projector to default to any one of its inputs each time the projector is turned on.
LAST
Sets the projector to default to the previous or last active input each time the projector is turned on.
AUTO
Searches for an active source in order of [HDMI1]
→
[HDMI2]
→
[COMPUTER]
→
[HDBaseT]
→
[USB-A]
→
[LAN] and displays the first found source.
HDMI1
Displays the digital source from the HDMI 1 IN terminal every time the projector is turned on.
HDMI2
Displays the digital source from the HDMI 2 IN terminal every time the projector is turned on.
COMPUTER
Displays the computer signal from the COMPUTER IN terminal every time the projector is turned on.
HDBaseT
Projects the signal transmitted from the terminals supported HDBaseT.
USB-A
Display the [VIEWER].
LAN
Displays a signal from LAN port (RJ-45) or the USB Wireless LAN Unit.
Setting carbon footprint factor [CARBON CONVERT]
Adjusts the carbon footprint factor in the carbon saving calculation. The initial setting is 0.505[kg-
CO2/kWh] based on the CO
2
Emissions from Fuel Combustion (2008 Edition) published by OECD.
Selecting your currency [CURRENCY]
Displays electricity pricing (available in 4 currency units).
$
US Dollar
€
EU Euro
JP¥
Japanese Yen
RMB¥
Chinese Yuan
