106
7-1. Things you can do by connecting the projector to a network
• You can send screen images via a wired LAN/wireless LAN from a terminal installed with our
MultiPresenter app to the projector and project them onto a screen.
See our company’s website for more details about MultiPresenter.
https://www.nec-display.com/dl/en/soft/multipresenter/index.html
B
C
D
E
A
B
C
D
A
Simultaneous display
Simultaneous connection
Send
Send
Send
Send
Stop
• When connecting the projector using a wireless LAN, you can set the following 3 profiles under
the [NETWORK SETTINGS] in the menu.
Profile name
Description
INTELLIGENT CONNECTION
Easily connect computers or tablet terminals installed with Multi-
Presenter to the projector in a peer-to-peer connection.
INFRASTRUCTURE
Connect the projector to an existing access point and connect
computers or tablet terminals installed with MultiPresenter to the
projector.
SIMPLE ACCESS POINT
Turn the projector into the [SIMPLE ACCESS POINT] to connect
computers or tablet terminals installed with MultiPresenter to the
projector.
• Multiple computers or tablet terminals can be connected at the same time. A maximum of
16 units can be connected in the [FREE] mode and a maximum of 50 units can be connected
in the [MANAGED] mode.
• Using the web browser of a computer and tablet terminal connected to a wired LAN/wireless
LAN, you can connect to the projector’s HTTP server to control the projector or configure the
[NETWORK SETTINGS].
• By configuring the network service settings of the projector, AMX beacon, HTTP server logon
password, PJLink, ALERT MAIL, CRESTRON, etc., can be used.
7. Connecting to a Network
