15
1
Make sure that the power cord is firmly and
correctly connected to the projector and outlet
2
Turn on the projector's power
Set the power switch to [ | ] (ON). The STANDBY/ON
indicator will light to solid orange.
3
Press the STANDBY/ON button (control
panel or remote control)
• The projector begins warming up and the
STANDBY/ON indicator blinks green.
• The STANDBY/ON indicator stops blinking
and lights to solid green once the
projector's power is completely on.
4
Remove the lens cap
The picture is projected.
power switch
STANDBY/ON indicator
3
STANDBY/ON
VIDEO
UP
DOWN
BLANK
LASER
INDICATOR
LASER
RGB
FOCUS
ZOOM
PAGE
TURNING ON THE POWER
Precautions
Connect all devices to be used to the projector prior to turning on the power.
12
8
〜
WARNING
When the power is ON, a strong light is emitted. Do not look into the
lens.
Turn the
power on/off in
right order.
• Power on the
projector before the
computer or video
tape recorder.
• Power off the
projector after the
computer or video
tape recorder.
NOTE
Control panel
STANDBY/ON
INPUT
KEYSTONE
RESET
MENU
LANP
TENP
ONE TOUCH
RGB
BNC
DVI
VIDEO
S-VIDEO
COMPONENT
FOCUS
ZOOM
STANDBY/ON
01CP-X870Vol1/E-責 03.1.9 4:19 PM ページ 15
