Pull down hard on each socket onto
the let and use the rubber mallet to
insure the let is at the bottom of the
socket. Failure to do so will result in
the windows not fitting properly!
You may want to install some
Loctite™
material on each set
screw.
Install the 1/8 inch set
screws that were in
the bag tapped to the
surrey frame. Tighten
snuggly for a secure
fit. Notice that we
are using two in the
four corners. Please
install ALL the set
screws. High winds
can remove the top!
Installing the Frame to Legs (final steps)