3
Any new or repaired jack shall be
carefully inspected prior to initial use. An
inspection shall be made by or under the
direction of a person familiar with air motor jack
operations and industrial safety standards.
a.
Check for proper service of grease and
oil (refer to paragraph 2-9).
b.
Make a detailed external inspection for
proper assembly. Check for any loose
or missing parts, such as cotter pins,
springs, or washers. Remove from
service any jack incorrectly assembled
or with missing parts.
c.
Operate the jack through at least one
lifting and lowering cycle while
observing lifting-mechanism operation.
Remove from service any jack which
shows evidence of erratic operation.
d.
Perform load test in accordance with
paragraph 2-7.
2-4.
Frequent Inspection
Visual examination by the operator or
other qualified designated personnel with
records not required.
a.
Normal service—one month
b.
Severe service—before each use or
daily, whichever is less frequent.
FIGURE 2-1. INSPECTOR’S REPORT
Item
Remarks (List Deficiencies and Recommended Action
Inspector’s Date Approved Date
Signature Inspected By