5
2
3.
Mount stand and control circuitry cabinet
3.1
Table tops
The cutouts of self-manufactured table tops must have the dimensions
indicated in the sketch.
Caution: Danger of injury !
The table tops must have the required load-carrying capacity
and strength.
3.2
Mount the stand parts
–
Mount the individual parts of the stand as shown in the illustration.
–
Set the adjusting screw 3 to ensure the stability of the stand.
All four feet of the stand must touch the floor.
–
Screw pedal 2 on the stand strut 1.
–
Align pedal laterally.
Shift the pedal sideways so that it is positioned centrally to the oil pan.
The stand strut is provided with slotted holes for aligning the pedal.
3
2
1
Summary of Contents for 530
Page 6: ...1 3 9 8 7 6 2 5 4 ...
