9
cookware base could melt down and
damage your hob. In such a case, do
not touch the cookware and switch the
cooking zone off.
If the hob does not work properly after
cooling down, please contact our Tech-
nical Assistance Service.
• Cookware detection:
Each induction cooking zone has a co-
okware detection minimum limit, which
varies according to the material of the
cookware being used . For this reason,
you should use the cooking zone which
is most suitable for the diameter of the
cookware you are going to use.
If the symbol appears on the cooking
zone
C
display, it means that :
1)
the cookware used is not suitable for
induction cooking.
2)
the cookware diameter is smaller
than the one allowed by the hob.
3)
No cookware is on the cooking zone.
COOKING ZONE
DIAMETER
MINIMUM
DIAMETER POT
Ø 160 mm
110 mm
Ø 200 mm
145 mm
USE
Use the touch control system, related
to the position corresponding to your
cooking needs, taking into account that
the higher the number, the more the
heat released.
TOUCH CONTROL
(Fig.1):
A -
On/Off key
B -
Cooking zone selection / Increment
“
+
” key
C -
Cooking zone display
D -
Double cooking zone
/
Booster
E -
Timer key
F -
Timer display
G -
Decrement key “
-
”
D1 -
Double cooking zone indicator
• Switching the cooking top on:
Press
A
key to switch the top on.
All the displays
C
relative to the cooking
zones switch on in the standby position
.
The control unit remains active for 20
seconds.
If no cooking zone is selected within this
time, the ccoking top switches off auto-
matically.
• Switching cooking zones on :
Press key
A
to switch the hob on.
Select the desired cooking zone, by
pressing one of the
B
keys.
Press the
B
or
G
keys to increase or
decrease the power of the cooking
zone .
The power of each single cooking zone
can be set in 9 different positions and
will be shown in the C display with a
number ranging from to .
• Booster function ( Induction zone):
This function further reduces the co-
oking time of a certain zone, by bringing
the temperature to the maximum power
for
10
minutes . At the end of these ti-
meframe, the cooking zone power will
automatically go back to level .
The use of this function is recommen-
ded for heating large quantities of li-
quids ( e.g. water to cook pasta) or food
in a very short time.
To activate this function, select your
cooking zone and press the
D
key until
you reach level . Then press the
D
key again . An acoustic signal will be
heard, and the symbol will be shown
on the cooking zone display.