DUDOFF G03-M1 Installation And User Instructions Manual Download Page 11

11

This product complies with EU Directive 2002/96/EC. 

The  crossed-out  dustbin  symbol  reported  on  the  appliance  indicates  that  the  appliance 

must  be  disposed  of  separately  from  other  domestic  refuse  at  the  end  of  its  useful  life. 

It  must  therefore  be  delivered  to  a  waste  recycling  centre  specifically  for  electric  and 

electronic  equipment  or  returned  to  the  retailer  at  the  moment  of  purchase  of  a  new 

equivalent appliance.

The user is responsible for delivering the appliance to the appropriate collection centre at the end of its 

useful life, Failure to do so may result in a fine, as provided for by laws governing waste disposal. 

Differential  collection  of  waste  products  for  eventual  recycling,  treatment  and  environmentally  friendly 

disposal  helps  reduce  possible  negative  effects  on  the  environment  and  health,  and  also  enables  the 

materials making up the product to be recycled.

For more detailed information on the available refuse collection systems, refer to the local Municipal Solid 

Waste disposal centre or the shop where the product was purchased.

Producers and importers are responsible for fulfilling their obligations as regards recycling, treatment and 

environmentally friendly disposal by directly or indirectly participating in the collection system.

The  manufacturing  firm  refuses  all  responsibility  for  any  possible  imprecision  in  this  booklet,  due  to 

misprints or clerical errors. It reserves the right to make all the changes that it will consider necessary in 

its own products, without affecting the essential characteristics of functionality and safety.

Summary of Contents for G03-M1












Reviews: