5
INSTRUCTION FOR THE USER
NOTICE
•
Use only flat pans and with sufficiently thick base,
equal or not much superior that the hot plate
(fig.1).
•
The containers should not have rough bottoms in
order to avoid scratching the heat surface of the
top.
•
Do not switch the electric plate without the pan
over the plate.
•
Do not cook any food on the hot area.
•
Avoid overflows of liquid.
•
Turn off the plate few minutes before the cooking
end.
USE
Switching on
The control is switched on by pressing the On/Off
key (key 6) for 1 second, causing a sound signal;
it will not turn on while the Key Lock function (key
10) is active (indicated by a LED) (Led 11).
The heating elements remain switched off (all the
digits at 0) until a power level is selected. If this is
not done with in 10 seconds the control switches
off automatically.
Selecting the cooking level
With the control turned on, the first time that the (+)
sensor (key 1) is touched the heating element is
turned on to the present level (in EEPROM).
The (+) sensor raises the cooking level to a
maximum of 9, and the (-) (key 1) sensor reduces
the cooking level to 0 (heating element switched
off).
If a sensor is continuously pressed, the action
involved is repeated every half second.
If we start with the (-) sensor the cooking level will
be the highest (9).
Switching the double cooking area
The control (key3) or (key12) can be used to
activate 2 heating elements with a double cooking
area. Each cooking areahas an associated LED
(Led 4 & 13).
Touch the double area selector to select/deselect
the double cooking area. If one heating-element
has 1 double area the procedure will be:
•
1rs-touch: the double area is selected.
•
2nd-touch: double area are not selected.
When the double cooking area is selected the
associated LED (Led 4 or 13) turns on, although its
heating-element has not any power level, and its
relay will be still switch.
Activating the heat-up function
When cooking level 9 is selected (this function can
only be operated from this level) touching the (+)
(Key1) sensor, the decimal point on the display
(5) blinks for 10 seconds, during which the desired
power level must be selected (between 1 and 8).
After this time there is a sound signal, and the
decimal point remains fixed, indicating the heat-up
function is ON. Should the selected level be 0 or 9,
the heat-up function is cancelled.
With the heat-up function activated, by touching
the (+) sensor the duration of this function extends
to the new power value selected; if the power is
9, the heat-up function is cancelled. When the
heat-up functionis finished, there is a sound signal,
the decimal point of the display goes out and the
element remains at the chosen power level.
POWER LEVEL
HEAT-UP TIMER
1
1'11"
2
2'44"
3
4'47"
4
5'28"
5
6'29"
6
1'11"
7
2'44"
8
2'44"
All operation relative to installation and electric connection should be carried out by
skilledpersonnel in conformity with the regulations in force. The specific instruction are described
in the booklet section intended for the installer
