4
1) SWITCHING ON THE BARBECUE
The barbecue is controlled by a power regulator with
12 positions (see fig. 1). Turn the knob clockwise to
the desired position (from 1 to 12) to switch it on.
To use the grill function turn the knob to position 12. A
light click warns that the thermostat has been shut
down and the resistance will quickly become red-hot.
A red indicator lamp indicates it is switched on.
The barbecue allows fast cooking on the grill.
The function of the lava stone contained in the drip
pan is to absorb drippings of oil or fat that are
produced during cooking. It also accumulates heat
during the initial operating phase of the resistance
allowing, before long, uniform grilling very similar to
that obtained using charcoal.
For better results it is recommended you pre-heat the
lava stone for at least 10 minutes on position 1. This
step is strongly recommended when the appliance is
switched on for the first time. It reduces the risk of the
cooked food absorbing the odours produced by the
resistance the first time it is switched on.
USE
FIG. 1
"Warning: Charcoal or similar combustible
fuels must not be used with this appliance”