![Dudek WARP ENERGY User Manual Download Page 50](http://html1.mh-extra.com/html/dudek/warp-energy/warp-energy_user-manual_2537998050.webp)
50
rigging scheme
The rigging scheme itself is published on the next page, while tables
of line lengths you will find in attachments to this manual.
Lengths are measured with a specialised, computer-operated device.
All the lines before measurement are stretched with a steady 5 kg
load. Thanks to abovementioned device and proper procedures,
final tolerance of line lengths does not exceed +/- 10mm.
Note:
Distances given below are to be understood as
distances between connection points. When cutting a line for
repair,
20 cm extra must be added
, as at each end a 10 cm
stitch is required to fix the loop. The only exception is the
main steering line (BRP), which is looped only at the upper
end, with at least 15 cm margin for fastening brake handle
(this means for this line extra 25 cm than in the table is
needed).
Summary of Contents for WARP ENERGY
Page 1: ...user manual V 06 2020 ...
Page 20: ...20 TEA assembly ...
Page 21: ...21 TEA assembly ...