Dudek VOX-25S, User Manual

Page: 25 / 36

23 23
You will receive some small gifts as well.
Remember to fill out and send us the registration card sewn in the
trailing edge.
12. Lining tables
Line sizes in [cm] ±2 cm. Lengths are measured under a 5-kg load. Line
types D-Dyneema, T-Technora.
xP - main lines,
xD - secondary lines,
xT - tertiary lines (for A,B,C,D - near the canopy),
EC - fourth layer of breaks (near the canopy).
The line lengths specified in the table should be read as a distance between
two connection points. The line cut for repair should be 20 cm longer, as loop
on each end is 10 cm long. One exception is main steering line (EP1) which
has only upper loop and a 20 cm bottom margin to tied the handle (i.e. 30 cm
more should be cut).
USER MANUAL USER MANUAL