Dudek Funky 2018, User Manual

Page: 21 / 33

!
After each installation of a rescue chute please run a compatibility test. In order to do that, hang your harness as ready for flght. Sit
down and assume your piloting position. Grab the release handle and pull it sidewise with a resolute movement, so that the chute
slids completely out of the container. Do not throw the rescue chute away, so that the bag is not opened. If everything went
smoothly, put the chute back into the container.
However, if the chute is not properly released, the most probable reasons are:
 too big a chute in relation to the container (after repacking the rescue chute is usually bigger than a brand-new one)

you pull the the handle not strong enough or in wrong direction (ie. to the front, back, or up)
!
Leaving the sliders in the upper position (as in the pictures below) will make it
impossible to open the container and use the rescue parachute! Before the flight,
make sure that the container is properly closed.
21