Dudek FreeWay, User Manual

Page: 24 / 32

8. RIGGING SCHEME
The rigging scheme itself is published on the next page, while tables of line
lengths you will find on our website
www.dudek.eu
Line lengths are measured with specialized, computer-operated device. All
lines before cut are stretched with a steady 5 kg load. Thanks to the
abovementioned device and proper procedures final tolerance of line lengths
does not exceed 0.15%.
CAUTION!!! Distances given below are to be understood as distances
between connection points. When cutting a line for repairs, 200 mm more
must be counted, as on each end a 100 mm stitch is required to fix the loop.
The only exception is main steering line (brmain), which is looped at the
upper end only, while down there is 200 mm margin left for fastening the
brake handle (that means 300 mm more is needed to be cut).
Length of the steering line is given for the high hangpoint scenario (i.e.
longer lines). For the lower hangpoints line is shorter by some 15 cm (you
have to fix the handle higher.
22