Installation
Guide
Cornermatic
®
Plus
Adjustable Dual Head Chute Retrofit
NOTE: Make sure the machine is powered off when working on this retrofit. The only
time it should be powered on during this procedure is to raise or lower the upper head.
To Remove the Lower Chute
Remove the lower chute by removing
the 2 screws shown on figure 1 and the
2 bolts shown on figure 2.
Remove the pusher cover by removing
the 4 screws in figure 3.
To Install the New Lower Chute
Remove the 4 screws from the new
chute as shown in figure 4 and set
them aside.
Place the new chute into position and
attach using the supplied screws at the
points shown in figure 5.
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
