6
L1023004-D
–
User manual for Duco's ventilation systems
Permanent manual setting
A permanent setting is activated for the zone in which the user is located. This setting remains active until the user deacti-
vates it again.
Note: in a non-zonal system, the permanent setting applies to the whole system.
Depending on the software version of your User controller, the permanent setting may not be available.
In that case, the above actions will activate the unoccupied setting for the setting, and the temporary
setting for the and settings.
AUTO
approx. 5 sec
to
AUTO
AUTO
Wired power supply
By long-pressing , or until the 4 LEDs light up briefly, the respective setting will be activated permanently for the
zone in which the user is located. The selected setting will light up magenta for as long as the permanent setting is
activated. Tap any button (at random) to deactivate a permanent setting.
AUTO
approx. 5 sec
to
AUTO
AUTO
Battery powered
By long-pressing , or until the green LED lights up for 5 seconds, the permanent setting will be activated per-
manently for the zone in which the user is located. The battery-powered controller does not give any indication that a
permanent setting is activated. Tap any button (at random) to deactivate a permanent setting.
