Duco IQ-unit, Quick Start Manual, Page: 99 / 112

99
ENGLISH
The system needs to be configured for it to work correctly. This will
ensure its operation is as quiet and as energy-efficient as possible.
See under the Tools heading at www.duco.eu for info about determining
ventilation flow rates.
Configuration takes place in two stages: setting exhaust vents and
actual configuration.
The exhaust vents are installed in an exhaust duct for humid/stale air
extraction. For correct configuration, the vents must be set depending
on the exhaust method:
Central exhaust: set the vents to match the desired flow rate in accord-
ance with the following table.
Zonal exhaust: set the vents in accordance with the methods that
follow, depending on the situation in each zone.
When using DucoVent Design, exhaust vents always leave the outer
ring in place for acoustic effect.
7
Configuration
7A.
Setting exhaust vents