42
Erase DDA
This function deletes data stored in the DDA (not
fitted for this model, but available from the Ducati
network): the data logger must be connected to
vehicle wiring.
To erase data, enter the menu page “Erase DDA“.
If you press switch (12, fig. 6) in position B “
▼
“ for 3
seconds and the DDA is not acquiring data, the
message “WAIT…” is shown on the display for 10
seconds; after these 10 seconds, message “ERASE
OK“ is displayed for 2 seconds to confirm that the
data in the DDA data logger have been erased.
If switch (12, fig. 6) is pressed in the B “
▼
“ position
for 3 seconds while the DDA data logger is acquiring
data, the data logger memory is not erased and the
display shows message “FAIL“ for 2 seconds.
DDA = ON
fig. 25
Displayed for 2 secs.
Displayed for 10 secs.
Displayed for 2 secs.
B = On for 3 secs.
YES
NO
Summary of Contents for Superbike 848evo Corse
Page 1: ...cod 913 7 205 1A...
Page 2: ...1 ENGLISH Owner s manual...
Page 143: ...Stampato 10 2012 Cod 913 7 205 1A...
Page 144: ...cod 913 7 205 1A...