Ducati SCRAMBLER 2020, Owner'S Manual, Page: 138 / 239

Entering the PIN CODE
Press button (1) or (2) to access the PIN CODE
entering mode. Digit “0” on the left will start flashing
(1st digit to enter) (Fig 140).
Otherwise, if button (4) is pressed without entering
the PIN CODE, this page will be quitted, you will go
back to the “main” page, any error will be signalled
(as planned) and the “engine lock” will be kept.
To set the digit, each time you press the button (1)
the displayed number increases by one (+ 1) up to "9"
and then starts back from “0”, vice versa each time
you press the button (2) the number decreases by
one (- 1) up to "0" and then starts back from "9".
Press button (4) to confirm the first digit and
automatically move to the setting of the following
digit, and so on until the fourth and last digit
(Fig 141).
1
2 4
Fig 140
1
2 4
Fig 141
137