Ducati Scrambler 1100 Pro 2020, Owner'S Manual, Page: 192 / 246

Important
Make sure the charger is OFF when you
connect the battery to it, or you might get sparks at
the battery terminals that could ignite the gases
inside the cells. Always connect the red positive (+)
terminal first.
Grease the screws (1).
Refit the battery, connect the positive cable (2), and
ABS positive cable (3), to the positive terminal, the
negative cable (4), and the ABS negative cable (5), to
the negative terminal of the battery, always starting
from the positive one (+), and start the screws (1).
Attention
Keep the battery out of the reach of children.
Charge the battery at 0.9 A for 5÷10 hours.
If the motorcycle must be jump-started in an
emergency with an external starting device, it is
possible to connect the starting device to the
battery (A) without removing it from the vehicle.
Connect the external starting device positive pole to
the battery positive pole and the external starting
device negative pole to the battery negative pole.
Refit and fasten the elastic band (B).
Refit the seat as described in chapter “Removing and
refitting the seat”.
Attention
When connecting the external starting device
to the poles of the vehicle battery, pay utmost
attention not to touch any other metal parts on the
vehicle.
191