52
E
Setting the gear change and rear brake
pedals
The position of the gearchange and rear brake pedals in
relation to the footrests can be adjusted to suit the
requirements of the rider.
To adjust the position, proceed as follows:
hold the linkage (1) and slacken the lock nuts (2) and (3).
Note
The locknut (2) has a left-hand thread.
Turn the tie-rod (1) using an open-ended wrench on the flats
to move the gear change pedal to the required position.
Tighten both lock nuts onto the rod.
2
1
3
fig. 38
