Ducati PANIGALE V4 2022 Owner'S Manual Download

Page: 285 / 310

27/22

Drive chain from gearbox to rear wheel.

Make: DID 525HV3 KAI ZB

Links: 114

Important

The above gear ratios are the homologated

ones and under no circumstances must they be

modified.
However, if you wish to tune up your motorcycle for

competitions or special tracks, Ducati Motor Holding

S.p.A. will be pleased to provide information about

the special ratios available. Contact a Ducati Dealer

or Authorised Service Centre.

Attention

If the rear sprocket needs replacing, contact a

Ducati Dealer or authorised Service Centre.

Incorrect replacement of this component could

seriously compromise your safety and cause

irreparable damage to the motorcycle.

Frame

Cast monocoque frame in aluminium alloy.

Aluminium alloy rear subframe.

Steering head angle: 24.5°.

Steering angle: 26° LH side / 26° RH side.

Trail: 100 mm (3.93 in).

Wheels

Front

3-spoke, light-alloy forged rim.

Size: MT3.50x17"

Rear

3-spoke, light-alloy forged rim.

Size: MT6.00x17"

Tyres

Tyre pressure

On the road (rider only)

2.3 bar (33.36 psi) (front) - 2.1 bar (30.46 psi) (rear).

On the road (rider + pas bags):

2.5 bar (36.26 psi) (front) - 2.9 bar (42.06 psi) (rear).

On track (rider only):

2.3 bar (33.36 psi) (front) - 1.8 bar (26.10 psi) (rear).

As tyre pressure is affected by ambient temperature

and altitude variations, you are advised to check and

adjust it whenever you are riding in areas where

ample variations in temperature or altitude occur.

284

Summary of Contents for PANIGALE V4 2022























































































































































































































































































































Search results

Summary of Contents for PANIGALE V4 2022

Reviews:

Related manuals for PANIGALE V4 2022

Brands by name

Popular brands

Ducati PANIGALE V4 2022, Owner'S Manual

Search results

Summary of Contents for PANIGALE V4 2022

Reviews:

Related manuals for PANIGALE V4 2022

Brands by name

Popular brands