displayed with the initial indication "0’00’’00" and
the LAP number "LAP – –". The next time rider
pushes the FLASH button (3), the lap timer is
reactivated.
Note
When the LAP function is active, the FLASH
button takes on the dual function of high beam
"FLASH" and LAP timer start / stop (new lap start
indication).
It is possible to record the lap time, for a total of 15
consecutive laps.
Laps are numbered from 01 to 15: when lap 15 is
reached, “FULL” is displayed when button FLASH (3)
is pressed.
To delete the recorded laps, refer to LAP paragraph
page 0 of Setting menu.
For each lap, the lap time, max RPM value and max
speed value are memorised.
The instrument panel can record:
-
no. 15 lap times (time between consecutive start
and stop);
-
no. 15 values for max. RPM (maximum RPM
value reached in every lap);
-
no. 15 values for max. speed (maximum speed
value reached in every lap);
200
Summary of Contents for PANIGALE V4 2020
