manualshive.com logo in svg

Ducati MULTISTRADA V2 2022, Owner'S Manual

Share
Download
Ducati MULTISTRADA V2 2022 Owner'S Manual Download Page 262

Engine

Ducati Testastretta, Twin cylinder, L-type,

Desmodromic timing system, 4 valves per cylinder,

liquid cooling.
Bore: 94 mm (3.7 in)
Stroke: 67.5 mm (2.66 in)
Total displacement: 937 cu. cm (57.18 cu in)
Compression ratio: (12.6±0.5):1
Lubrication: lobe-type oil pump with built-in by-pass

valve and oil cooler
Maximum power at crankshaft (EU) Regulation no.

134/2014, Annex X, kW/HP:
83 kW/113 HP at 9,000

 

rpm

Maximum torque at crankshaft (EU) Regulation no.

134/2014 Annex X:
94 Nm / 9.6 Kgm at 6,750

 

rpm

Max. rotation speed:
10200

 

rpm.

Important

Do not exceed the specified rpm limits in any

running conditions.

Attention

The indicated power/torque values have been

measured with a static test bench according to type-

approval standards and match with the data

detected during type-approval process; they are

indicated in the vehicle registration document.

261

Summary of Contents for MULTISTRADA V2 2022



































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands