Set time
This function allows setting the time, in the example
shown here the time format is 12 hours (AM/PM).
●
Use buttons (1) and (2) from the Interactive
Menu to select the Setting menu item and press
ENTER (3).
●
Select the Date and time item and press ENTER
(3).
●
Select the Set time item and press ENTER (3).
The hour number becomes selectable and is
displayed with two arrows placed above and below it;
the available values are also displayed (Fig 157). Use
buttons (1) and (2) to scroll and select the desired
value. Press ENTER (3) to confirm and move on to
the number of the minutes.
Fig 156
Fig 157
171
Summary of Contents for MULTISTRADA Series
