Casing unit: outer components
19 Neutral switch
20 Gasket
21 Gear pin
22 Washer
23 Intermediate gear
24 Washer
25 Circlip
26 Screw
27 Blanking plug
28 Gasket
Spare parts catalogue
Timing
Filters and oil pump
Half crankcases
Electric starter and ignition
Caution
Bold reference numbers in this section identify parts shown in this exploded view diagram. These parts do not appear
in the figures near the text.
Removing the outer components
Operations
Reference See Section
Remove the engine from the frame
Remove the lubrication system
N 2.1,
Remove the complete head unit with
timing system
N 4.2,
Remove the complete cylinder/piston
unit
Removing cylinder / piston assy
Note
The removal procedure described is only necessary when changing or cleaning the casings. If the original casings are
reused, the components may be left in place.
Remove oil breather valve (10) and O-ring (
11
) from the engine block.
Undo and remove the two plugs (14) and seals (8) from the clutch-side casing.
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_N_9A9_00.73.1.html (2 of 10) [10/7/2008 8:46:24 PM]