Ducati MONSTER 1200 s Owner'S Manual Download Page 238

Page: 238 / 337

Tank filler plug

OPENING

Lift flap (1) and insert the key in the lock. Turn the key

clockwise by 1/4 of a turn to release the lock.

CLOSING

Close the plug with key inserted and press to fit in

place. Turn the key counter clockwise to the original

position and remove it. Close flap (1).

Note

Plug can only be closed when key is inserted.

Warning

After refuelling, always make sure that the plug

is perfectly in place and closed.

Fig. 157

Fig. 158

237

Summary of Contents for MONSTER 1200 s


















































































































































































































































































































































Search results

Summary of Contents for MONSTER 1200 s

Reviews:

Related manuals for MONSTER 1200 s

Brands by name

Popular brands

Ducati MONSTER 1200 s, Owner'S Manual

Search results

Summary of Contents for MONSTER 1200 s

Reviews:

Related manuals for MONSTER 1200 s

Brands by name

Popular brands