Parking
Park the stopped motorcycle on the side stand. To
prevent theft, turn the handlebar fully left and turn
the ignition key to position (3). If you park in a garage
or other indoor area, make sure that there is proper
ventilation and that the motorcycle is not near a
source of heat. You may leave the parking lights on
by turning the key to position (4).
Important
Do not leave the key to position (4) for a long
time, or this could lead to battery discharge. Never
leave the ignition key in the switch when you are
leaving your motorcycle unattended.
Attention
The exhaust system might be hot, even after
engine is switched OFF; pay particular attention not
to touch the exhaust system with any body part and
do not park the motorcycle next to inflammable
material (wood, leaves etc.).
Attention
Using padlocks or other locks designed to
prevent motorcycle motion, such as brake disc locks,
rear sprocket locks, and so on is dangerous and may
impair motorcycle operation and affect the safety of
rider and passenger.
3
4
Fig 43
74
Summary of Contents for Hypermotard 950
