Ducati Hypermotard 950, Owner'S Manual

Page: 198 / 288

Setting menu - tyre setting and drive
ratio (Tyre Calibration)
This function allows the user to run the procedure for
calibrating and teaching in the tyre rolling
circumference and final drive ratio.
Enter the setting menu (SETTING MENU).
Select "Tire Calibration" option, by pressing button
(1) or (2). Once function is displayed, press button (4).
As you enter this function (Fig 157), the instrument
panel displays the following indications:
●
< Back
●
Start
●
Default
●
< Back
"Default" indication is visible only if the set
parameter is different from the default parameter.
To exit the menu and go back to previous page
highlight the "< Back" indication using button (1) or
(2) and press button (4).
To start the drive ratio and tyre calibration
procedure, highlight "Start" option and press button
(4).
Tire Calibration
DRL Control
Turn indicators
Units
Service
1
2 4
Fig 156
... ...
Tire Calibration
Start
< Back
< Back
Default
1
2 4
Fig 157
197